Aluminum Rear Disc Wheel With Flange Nuts (Hub-Piloted) - Ford F650 Owner's Manual

Maintenance and Specifications

Aluminum rear disc wheel with flange nuts (hub-piloted)

1. Flange nut
2. Wheel(s)
3. Brake drum
4. Wheel stud (22 mm)
5. Wheel hub
6. Wheel locator pad
Prior to re-installing rear aluminum hub-piloted wheels, clean each wheel
locator pad on the hub from all dirt, rust and foreign material. Apply a
light coat of chassis grease, never-seize or disc brake corrosion control
grease, only to the wheel locator pad.
When installing the tire and rim assembly on disc-brake equipped axles,
make sure the tire valve stem clears the brake caliper. The use of a tire
manufacturer's stem forming tool is the only acceptable method of
obtaining clearance when necessary.
Note: Always observe the following instructions:
Failure to follow these instructions could result in property
damage, personal injury or death
212
1
2
3
6
4
5