Safety Instructions - Clarity P300 User Manual

Read and Understand
All Instructions
1. Never install telephone wiring
during a lightning storm.
2. Never install telephone jacks in
wet locations unless the jack is
specifically designed for wet
locations.
3. Never touch uninsulated
telephone wires or terminals
unless the line has been
disconnected at the network
interface.
4. Use caution when installing or
modifying telephone lines.
Important Safety
Instructions
When using your telephone equip-
ment, basic safety precautions should
always be followed to reduce the risk
of fire, electric shock and injury to
persons, including the following:
• Read and understand all
instructions.
• Follow all warnings and instruc-
tions marked on the product.
• Unplug this product from the wall
outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
• Do not use this product near
water, for example, near a bath tub,
wash bowl, kitchen sink, or laundry
4

SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS
tub, in a wet basement or near a
swimming pool.
• Do not place this product on an
unstable cart, stand or table.
The product may fall, causing
serious damage to the product.
• Slots and openings in the base unit
and the back or bottom are pro-
vided for ventilation, to protect it
from overheating. These openings
must not be blocked or covered.
The openings should never be
blocked by placing the product on
the bed, sofa, rug or other similar
surface. This product should never
be placed near or over a radia-
tor or heat register. This product
should not be placed in a built-in
installation unless proper ventila-
tion is provided.
• Do not allow anything to rest
on the power cord. Do not locate
this product where the cord will
be abused by persons walking on it.
• Never push objects of any kind
into this product through base unit
slots as they may touch dangerous
voltage points or short out parts
that could result in a risk of fire or
electric shock. Never spill liquid of
any kind on the product.
• To reduce the risk of electric
shock, do not disassemble this
product. Opening or removing
covers may expose you to
dangerous voltages or other risks.