Boost Button; Ringer Volume; Audio Output; Boost On/Off Switch - Clarity P300 User Manual

RINGER
PITCH
Fig. 9 – Boost button
E. Boost Button
Press the BOOST button to turn
the amplifier on as shown in figure
9. When BOOST is on, it returns to
your previous amplification setting
and a red light will illuminate in the
ring flasher area. When you hang up
the handset, it automatically turns off
the amplifier.
RINGER
PITCH
Fig. 10 – Boost flasher
F. Ringer Settings
You may adjust the ringer volume
(shown in figure 11) and tone (pitch)
of ring of your P300 phone to suit
your needs. When set on high, the
ringer produces a tone that reaches
approximately 75 decibels.
G. AUDIO Output
Enables assistive listening devices uti-
lizing a 3.5 mm jack, such as a neck-
loop, cochlear implant or personal
computer speakers. When connect-
ed, the outgoing sound is transmitted
Telephone Operations
FLASH
BOOST
CLARITY
POWER
RINGER
Off Lo Hi
Fig. 11 – Ringer settings switch
through the device and the sound on
the handset is disabled.
H. BOOST ON/OFF Switch
This switch will disable the reset
feature of the BOOST Clarity Power
button as follows:
(Located on the bottom of the base)
ON – When the Boost ON/OFF
switch is set to "ON", the Boost
function will be ON every time a call
starts, and will default to ON every
time the phone hangs up. During a
call, the BOOST Clarity Power
button can toggle the Clarity Power
ON or OFF according to the
user's needs.
OFF – When the Boost ON/OFF
switch is set to "OFF", the Boost
function (Clarity Power) will be
OFF every time a call starts, and the
user will need to press the BOOST
Clarity Power button in order to
gain the extra level of amplification.
If the phone hangs up, the Clarity
Power will reset to OFF. During a
call, the BOOST Clarity Power but-
ton can toggle the Clarity Power
function ON or OFF according to
the user's needs.
AUDIO
Output
13