250X_060-083.qxd 08.7.3 10:11 ページ75
14.Remove the engine hanger nuts/bolts (5),
engine hanger plates (6), and clutch cable
guide (7).
(5)
(5) engine hanger nuts/bolts
(6) engine hanger plates
(7) clutch cable guide
15.Remove the cylinder head bolts (8).
16.Loosen the cylinder bolt (9).
(8)
(6)
(9)
(7)
(8) cylinder head bolts
(9) cylinder bolt
17.Remove the cylinder head nuts/washers (10)
and cylinder head (11).
Loosen the nuts in a criss-cross pattern in two or
three steps.
NOTICE
Do not let the nuts, washers, valve lifters, shims,
and cam chain fall into the crankcase.
(10)
(10) cylinder head nuts/washers
(11) cylinder head
Piston/Piston Rings/Piston Pin
18.Remove the dowel pins (12), cylinder head
gasket (13) and cam chain guide (14).
NOTICE
Do not let the dowel pins and cam chain fall into
the crankcase.
(12)
(13)
(12) dowel pins
(14) cam chain guide
(13) cylinder head gasket
(11)
Servicing Your Honda
(14)
75