Honda CRF250X Owner's Manual & Competition Handbook page 69

250X_060-083.qxd 08.7.3 10:11 ページ63
Muffler Installation
1. Remove the gasket.
2. Install a new gasket (1) on to the exhaust
pipe.
3. Install the muffler clamp (2) by aligning the
tab (4) of the muffler clamp with the cut-out
(5) of the muffler (3).
4. Install the muffler.
(3) (2)
(4)
(5)
(1) gasket (4) tab
(2) muffler clamp (5) cut-out
(3) muffler
5. Tighten the muffler B bolt (6) and muffler A
bolt/washer (7) to the specified torque:
26 N·m (2.7 kgf·m, 19 lbf·ft)
6. Tighten the muffler clamp bolt (8) to the
specified torque:
21 N·m (2.1 kgf·m, 15 lbf·ft)
(7)
(1)
(6)
(6) muffler B bolt (8) muffler clamp bolt
(7) muffler A bolt/washer
Exhaust Pipe/Muffler
7. Install the right side cover (9), collar (10) and
side cover bolt (11).
8. Install the seat mounting bolt (12) and tighten
it to the specified torque:
26 N·m (2.7 kgf·m, 19 lbf·ft)
(12)
(9)
(10)
(11)
(8)
(9) right side cover (11) side cover bolt
(10) collar (12) seat mounting bolt
Servicing Your Honda
63