Honda CRF250X Owner's Manual & Competition Handbook page 45

250X_030-059.qxd 08.7.3 10:10 ページ39
Installation
1. Loosen the subframe mounting upper bolt (1).
2. Loosely attach the lower ends of the subframe
(2) to the mainframe while connecting the air
cleaner connecting tube to the carburetor.
Then align the subframe with the rear wheel
and tighten the subframe mounting lower
bolts (3) and subframe mounting upper bolt to
the specified torque:
upper bolt: 30 N·m (3.1 kgf·m, 22 lbf·ft)
lower bolts: 49 N·m (5.0 kgf·m, 36 lbf·ft)
3. Check the hoses (4) for slack.
(2)
(1)
(4)
(3)
(1) subframe mounting upper bolt
(2) subframe
(3) subframe mounting lower bolts
(4) hoses
4. Tighten the screw (5) on the air cleaner
connecting tube clamp (6).
(6)
(5)
(5) screw
(6) air cleaner connecting tube clamp
5. Install the wire band (7).
(7)
(7) wire band
6. Install the muffler (page 63).
Subframe Upright Position
7. Install the seat (8) (page 35).
8. Install the left side cover (9), seat mounting
bolt (10), collar (11) and left side cover bolt
(12). Close the air cleaner housing cover (13)
and turn the quick fastener (14) clockwise.
(8)
(9)
(13)
(11)
(12)
(14)
(8) seat (12) left side cover bolt
(9) left side cover (13) air cleaner housing cover
(10) seat mounting bolt (14) quick fastener
(11) collar
9. Install the right side cover (15), seat mounting bolt
(16), collar (17) and right side cover bolt (18).
(15)
(16)
(18)
(17)
(15) right side cover
(16) seat mounting bolt
(17) collar
(18) right side cover bolt
10.Tighten the seat mounting bolts to the
specified torque:
26 N·m (2.7 kgf·m, 19 lbf·ft)
Servicing Your Honda
(10)
39