Honda CRF250X Owner's Manual & Competition Handbook page 125

250X_104-129.qxd 08.7.3 10:14 ページ119
28.Install the front visor by aligning its grommets
(36) with the tabs (37) on the steering stem.
(37)
(36) front visor grommets (37) tabs
29.Install and tighten the front visor bolts (38).
Install the handlebar pad (39).
(38) front visor bolts (39) handlebar pad
30.With the front brake applied, pump the fork
up and down several times to seat the axle and
check front brake operation.
(36)
31.While keeping the forks parallel, alternately
tighten the right axle pinch bolts (40) to the
specified torque:
20 N·m (2.0 kgf·m, 15 Ibf·ft)
NOTICE
(39)
To avoid damage when torquing the axle pinch
bolts, be sure the front axle shaft is seated firmly
(38) onto the left fork leg clamp inner surface.
32.Install the tripmeter cable (41) and tighten the
lock nut securely.
(40)
(40) right axle pinch bolts
Front Suspension Adjustments
33.Install the disc cover (42) and tighten the bolts
(43) to the specified torque:
13 N·m (1.3 kgf·m, 10 Ibf·ft)
(42) disc cover
34.Turn the rebound damping (44) and
compression damping (45) adjuster back to
their original setting.
(44)
(41)
(44) rebound damping
adjuster
(41) tripmeter cable
(42)
(43)
(43) bolts
(45)
(45) compression
damping adjuster
119
Adjustments for Competition