Honda CRF250X Owner's Manual & Competition Handbook page 114

250X_104-129.qxd 08.7.3 10:14 ページ108
Front Suspension Adjustments
1. Place your CRF on the optional workstand or
equivalent support with the front wheel off the
ground.
2. Remove the front visor bolts (3) and front
visor (4).
(3) front visor bolts
(4) front visor
3. Disconnect the headlight connector (5).
(5) headlight connector
4. Remove the handlebar pad.
Remove the handlebar holder nuts, washers,
mounting rubbers (6) and handlebar (7).
108
Adjustments for Competition
NOTICE
Keep the master cylinder upright to prevent air
from entering system.
(3)
(4)
(6) handlebar holder nuts/washers/mounting rubbers
(7) handlebar
5. Loosen the upper pinch bolts (8).
6. Loosen the fork dampers (9) using the lock
nut wrench but do not remove it yet.
NOTICE
Do not use an adjustable wrench to loosen the
(5)
fork damper: it may damage them.
(8)
(8) upper pinch bolts
(9) fork damper
7. Remove the disc cover (10) by removing the
bolts (11).
(10) disc cover
(7)
8. Remove the tripmeter cable (12) and front
(6) axle nut (13) and loosen the axle pinch bolts
(14) on both fork legs.
9. Pull the front axle shaft (15) out of the wheel
hub and remove the front wheel.
(12)
(14)
(15)
(9)
(12) tripmeter cable
(13) front axle nut
10.Remove the fork protector bolts (16), tripmeter
cable clamp bolts (17) and brake hose clamp
bolts (18) and fork protectors (19).
Remove the brake caliper bolts (20) and brake
caliper (21).
The fork protector bolts and brake caliper
bolts have a locking agent applied.
(10)
(11)
(11) bolts
(13)
(14) axle pinch bolts
(15) front axle shaft