Using A Special Application - Planet XRT-711A User Manual

Data - Special Applications Screen
Use this to Enable or Disable this Special Application as required.
Checkbox
Enter a descriptive name to identify this Special Application.
Name
•
Type - Select the protocol (TCP or UDP) used when you receive data
Incoming
from the special application or service. (Note: Some applications use
Ports
different protocols for outgoing and incoming data).
•
Start - Enter the beginning of the range of port numbers used by the
application server, for data you receive. If the application uses a single
port number, enter it in both the "Start" and "Finish" fields.
•
Finish - Enter the end of the range of port numbers used by the
application server, for data you receive.
•
Type - Select the protocol (TCP or UDP) used when you send data to
Outgoing
the remote system or service.
Ports
•
Start - Enter the beginning of the range of port numbers used by the
application server, for data you send to it. If the application uses a single
port number, enter it in both the "Start" and "Finish" fields.
•
Finish - Enter the end of the range of port numbers used by the
application server, for data you send to it. If the application uses a single
port number, enter it in both the "Start" and "Finish" fields.

Using a Special Application

•
Configure the Special Applications screen as required.
•
On your PC, use the application normally. Remember that only one (1) PC can use each
Special application at any time. Also, when 1 PC is finished using a particular Special
Application, there may need to be a "Time-out" before another PC can use the same
Special Application. The "Time-out" period may be up to 3 minutes.
If an application still cannot function correctly,
try using the "DMZ" feature.
Advanced Features
49