Table of Contents
Advertisement
Windows 2000 Server Configuration
The LPD/LPR Port is not enabled by default. To enable it, use this procedure:
1.
In Control Panel, select Add/Remove Programs, then Windows Components.
2.
Select Other Network File and Print Services, then click the Details button.
Figure 22: Adding LPD/LPR Port (Win 2000)
3.
Enable Print Services for Unix, and click OK.
4.
Click Next and complete the Wizard.
Adding the Printer
1.
Open your Printers folder, and start the Add Printer Wizard.
2.
When prompted, select Local Printer.
3.
On the Select the Printer Port screen, select LPR Port, as shown below. Click Next to
continue.
PC Configuration
33
Advertisement
Table of Contents
