Broadband Router User Guide
DIP Switches
DIP Switch Setting
Restore Default IP Address and Clear Password
If the Broadband Router's IP Address or password is lost, the following procedure can be used
to recover from this situation.
1.
Turn the power to the Broadband Router OFF.
2.
Set DIP switch 1 ON.
3.
Turn the power to the Broadband Router ON.
4.
Operate DIP switch 1 in the following sequence (you have 15 seconds to complete the
sequence):
•
OFF
•
ON
•
OFF
5.
The Broadband Router will now reset, and the Red Status LED flash. The following
changes will have been made. (Other configuration data is unchanged.)
•
IP Address set to its default value of 192.168.0.1
•
Network Mask set to 255.255.255.0
•
DHCP Server is enabled, and will allocate IP Addresses in the range 192.168.0.2 to
192.168.0.51.
•
The password cleared (no password).
6.
You can now connect to the Broadband Router and make any configuration changes
required.
Description
1=off
Normal Operation
2=off
1=off
DHCP Server function disabled.
2=on
1=on
Used to restore Default IP Address
2=off
and clear Password (See below)
1=on
Normal Operation.
2=on
6