Table of Contents
Advertisement
Figure 19: TCP/IP Properties (Windows XP)
5.
Ensure your TCP/IP settings are correct.
Using DHCP
To use DHCP, select the radio button Obtain an IP Address automatically. This is the default
Windows settings.
Restart your PC to ensure it obtains an IP Address from the Broadband Router.
Using a fixed IP Address ("Use the following IP Address")
•
If your PC is already configured, do NOT change the settings on the screen shown in
Figure 19 above, unless advised to do so by your network administrator.
•
You can enter the Broadband Router's IP address in the Default gateway field and click
OK. Your LAN administrator can advise you of the IP Address they assigned to the
Broadband Router.
•
If the DNS Server fields are empty, select Use the following DNS server addresses, and
enter the DNS address or addresses provided by your ISP, then click OK.
PC Configuration
27
Advertisement
Table of Contents
