Print Troubleshooting - Xerox D110 User Manual

Symptoms
The image is not the
desired size
If No, go to next symptom.
The image is coarse

Print troubleshooting

This section describes solutions for problems encountered during printing.
1. Unable to print
2. The print result was not what was expected
Xerox ® D110/D125/D136 Printer
User Guide
Cause and Remedy (Action)
Yes Cause The document glass or the document cover is dirty.
Action Clean the document glass or the document cover.
If problem is not solved, go to next Cause/Action.
Cause The document is made of highly transparent
material like a transparency.
Action Place a white sheet of paper on the document and
scan.
If problem is not solved, go to next Cause/Action.
Cause The document is misaligned.
Action Load the document correctly.
If problem is not solved, go to next Cause/Action.
Cause The document guides are in an incorrect position.
Action Load the document correctly, and align the
document guides with the edges of the document.
If problem is not solved, go to next Cause/Action.
Cause The document is a non-standard size.
Action Enter the document size and then scan.
If problem is not solved, go to next Cause/Action.
Cause The document is folded or bent.
Action Straighten and properly reset the document.
Yes Cause Resolution is too low.
Action Set a higher resolution.
Problem solving
10-33