Fault codes
049-100
Cause: There is a top tray sensor fault in the HCS.
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
Carefully remove all sheets and paper scraps from jam clearance areas.
049-101
Cause: There is a top tray sensor fault in the HCS.
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
Carefully remove all sheets and paper scraps from jam clearance areas.
049-102
Cause: There is a top tray sensor fault in the HCS.
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
Carefully remove all sheets and paper scraps from jam clearance areas.
049-104
Cause: HCS bypass exit sensor fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
Carefully remove all sheets and paper scraps from jam clearance areas.
049-105
Cause: HCS bypass exit sensor fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
Carefully remove all sheets and paper scraps from jam clearance areas.
Xerox
Color J75 Press
®
User Guide
High Capacity Stacker (HCS)
14-11