Xerox Color J75 Press User Manual page 199

Remedy: Power off the machine (print engine), then power on. If problem continues,
contact the Customer Support Center.
048-315
Cause: Interface Module decurler sensor or belt problem
Remedy: Power off the machine (print engine), then power on. If problem continues,
contact the Customer Support Center.
048-316
Cause: Interface Module decurler sensor or belt problem
Remedy: Power off the machine (print engine), then power on. If problem continues,
contact the Customer Support Center.
048-317
Cause: Interface Module cooling fan failure
Remedy: Power off the machine (print engine), then power on. If problem continues,
contact the Customer Support Center.
048-318
Cause: Interface Module cooling fan failure
Remedy: Power off the machine (print engine), then power on. If problem continues,
contact the Customer Support Center.
048-319
Cause: Interface Module cooling fan failure
Remedy: Power off the machine (print engine), then power on. If problem continues,
contact the Customer Support Center.
048-320
Cause: Interface Module communication failure or connection failure
Remedy: Perform the following:
Check the connection between the Interface Module and the connected finishing
device or devices.
Fully clear any jams between the Interface Module and the connection finishing
device or devices.
Ensure all jam clearance handles/levers are returned to their closed positions.
After clearing all jams, remove any ejected paper from the finishing output area.
Power Off/On the machine.
048-321
Cause: Interface Module communication failure or connection failure
Remedy: Perform the following:
Check the connection between the Interface Module and the connected finishing
device or devices.
Xerox Color J75 Press
®
User Guide
Interface Module
13-11