Yamaha RX-V663 Owner's Manual page 87

■ Video settings
B)VIDEO SET
Note
Use "VIDEO" of "INIT" in "ADVANCED SETUP" to set the
parameters in "VIDEO SET" to the factory presets (see page 97).
B)VIDEO SET
.
VIDEO CONV.;;;;;;ON
[ ]/[ ]:
[p]/[[]:
Video conversion VIDEO CONV.
Use this feature to set whether to convert the video signals
input at the VIDEO, S VIDEO, and COMPONENT
VIDEO jacks.
Choice
ON Converts composite, S-video, and component
video signals interchangeably and up-converts
composite, S-video, and component video
signals to HDMI video signals.
OFF Does not convert any signals.
Notes
• This unit does not convert 480 line video signals and 576 line
video signals interchangeably.
• The analog component video signals with 480i (NTSC)/576i
(PAL) of resolution are converted into the S-video or composite
video signals and output at the S VIDEO MONITOR OUT and
VIDEO MONITOR OUT jacks.
• The converted video signals are only output at the MONITOR
OUT jacks. When recording a video source, you must make the
same type of video connections between each component.
• When composite video or S-video signals from a VCR are
converted into component video signals, the picture quality may
suffer depending on your VCR.
• Unconventional signals input at the composite video or S-video
jacks cannot be converted or may be output abnormally. In such
cases, set "VIDEO CONV." to "OFF".
Up/Down
Select
Functions
Customizing this unit (MANUAL SETUP)
■ Memory guard
C)MEMORY GUARD
Use this feature to prevent accidental changes to sound
field program parameter and other system settings.
C)MEMORY GUARD
>OFF
[p]/[[]:
[ENTER]:
Choice
OFF
Turns off the "MEMORY GUARD" feature.
ON Protects:
– sound field program parameters
– "AUTO SETUP" items
– all speaker levels
– "MANUAL SETUP" items
Notes
• You can change the following parameters even if "MEMORY
GUARD" is set to "ON":
– "EXTD SUR." in "SOUND MENU" (see page 80)
– "DECODER MODE" in "INPUT MENU" (see page 82)
– "MEMORY GUARD"
• When "MEMORY GUARD" is set to "ON", " " appears at the
top right of the "SET MENU" screen.
• You can change the settings of "SUR." in the sound field
program screen (see page 66) even if "MEMORY GUARD" is
set to "ON".
ON
Select
Return
Functions
G
85
En