Using The Remote Control For The Scene Feature - Yamaha RX-V663 Owner's Manual

Using the remote control for the SCENE feature

■ Controlling the input source
components in the SCENE mode
You can operate both this unit and the input source
component by using the remote control. You must set the
appropriate remote control code for each input source in
advance (see page 90).
Before performing the following operations, set the operation
mode selector on the remote control to F SOURCE.
Press the desired A SCENE button on the
1
remote control.
2
Press the desired buttons in the * area below
to control the input source component of the
selected SCENE template.
CODE SET TRANSMIT
POWER POWER STANDBY
TV AV
TUNER A B
DOCK CBL
V-AUX DTV CD
DVD DVR VCR
TV VOL TV CH VOLUME
*
TV MUTE TV INPUT
PROG ENHANCER
1 2 3
STRAIGHT PURE DIRECT
5 6 7
MULTI CH IN AUDIO SEL
9 0 10
PRESET/CH
LEVEL
TITLE
BAND
ENTER
RETURN
MEMORY
REC
SCENE
1 2 3
Note
*
These buttons control the input source component. See page 89
for details of the function of each button.
POWER
C
MD
CD-R
PHONO
AMP
Set to
SOURCE
SOURCE
TV
SUR. DECODE
4
PARAMETER
8
SLEEP
ENT
SET MENU
MENU
SRCH MODE
A/B/C/D/E
DISPLAY
SCENE
4
buttons
■ Setting the input source of the
customized SCENE template on the
remote control
If you customize the input source of the selected SCENE
template, you must set the input source of the SCENE
template on the remote control to operate the input source
component correctly.
Press the desired A SCENE button on the
1
remote control.
Press and hold the A SCENE button and the
2
desired input selector button ( 4 ).
The B TRANSMIT indicator flashes twice.
3
Keep holding down the buttons pressed in
step 2 until the B TRANSMIT indicator
flashes twice again.
Note
If the setting of the input source is not successful, the
B TRANSMIT indicator flashes repeatedly. In this case, repeat
the setup procedure.
Selecting the SCENE templates
41
En