Installation And Connection; Installation Kit; Installation And Safety Notices - Blaupunkt DVD-PLAYER MEU2 Operating And Installation Manual

In car entertainment dvd-player
Table of Contents

Advertisement

Installation and connection

Installation kit

The supplied installation kit contains
three brackets, screws, an electrical
supply cable with 16-pin Molex plug and
an IR receiver with a 3.5 mm jack plug.

Installation and safety notices

Before connecting your DVD Player
ME2, please read the following informa-
tion carefully.
The battery's negative terminal must
be disconnected for the entire time
it takes to install and connect the
device.
When doing so, you must observe the
vehicle manufacturer's safety notices
(airbags, alarm systems, trip comput-
ers, immobilizers).
When installing the ME2, select a loca-
tion in the vehicle that allows you to at-
tach it firmly into place using screws.
The installation location should be such
that the ME2 does not get in the way of
the driver and cannot endanger the oc-
cupants in the event of the vehicle sud-
denly coming to a halt, for instance,
during an emergency stop.
Never place the remote control within
the inflation range of airbags and make
sure that the remote control is stored
securely so that it cannot injure the ve-
hicle occupants in the event of an emer-
gency stop.
INSTALLATION AND CONNECTION
You must take the following into account
when selecting the installation location:
- The vehicle tank must not be dam-
aged by screws.
- There must be no wires or pipes
running beneath the surface on
which you want to install the de-
vice.
- The spare wheel, tools, etc. must
not be damaged by the screws.
Please also make sure that the de-
vice does not restrict access to the
spare wheel, tools, etc.
Do not install the device in any location
that is:
- subjected to direct sunlight.
- near warm air outlets (heating,
etc.).
- subjected to rain or moisture.
- subjected to dust or dirt.
- subjected to strong vibrations.
To ensure that the device is installed
securely, make sure you only use the
supplied mounting components (brack-
ets, screws).
When installing the device, make sure
there is sufficient air circulation to cool
the ME2. Leave a clearance of 10 cm
around the ventilation slots.
33

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Me2

Table of Contents