Important Notes; What You Really Have To Read; Traffic Safety; Installation/Connection - Blaupunkt BARCELONA RCM 104 A Operating Instructions Manual

I GEO
To adjust the Balance (left/right) and
Fader (front/rear) settings.
Fader front
Balance
left
Fader rear
The last setting will be stored automati-
cally.
If the setting remains unchanged within
8 seconds, the display will switch back
to be previous indication.
J RT – Radiotext
Use this function to display message
texts transmitted by an RDS station. RT
messages will only be displayed if the
ignition is switched off.
Turn on the set.
To switch RT on: Press RT and wait
until the message text appears on the
display.
To switch RT off: Press RT.
K SRC (source)
To select between the connected audio
sources, for example cassette, radio, or
CD changer (option).
Balance
right

Important notes

What you really have to read

Before you operate your new car radio, plea-
se read the following information carefully.

Traffic safety

As the driver of a motor vehicle, it is your
responsibility to pay attention to the traffic
situation at all times. Never use your car radio
in a way that could distract you.
Please keep in mind that you travel a di-
stance of 14 m per second at a speed of only
50 km/h.
Do not adjust your radio in difficult driving
conditions that demand your full attention.
Always make sure that you are still able to
hear any warning signals coming from outsi-
de of the vehicle, such as police or fire engine
sirens, so that you can react accordingly.

Installation/connection

In order to ensure that the set functions
properly it is necessary that the positive po-
wer supply line is connected to the ignition
and the permanent +12 V connector of the
car radio.
If you would like to install your new car radio
by yourself or add other audio components to
the existing ones, then please read carefully
the enclosed instructions on installation and
connection.
31