Pro-Form 6.0 Ce Elliptical Manual page 13

14. Identify a Pivot Cover A (19), which has hooks,
and a Pivot Cover B (22), which has tabs.
Attach the Pivot Cover A (19) and the Pivot
Cover B (22) around the Right Upper Body Arm
(9) by pressing the hooks on the Pivot Cover A
onto the tabs on the Pivot Cover B.
Repeat this step on the other side of the
elliptical.
Tip: Make sure that the Pivot Covers (19, 22)
are positioned as shown.
15. Orient the Rear Upright Cover (3) as shown.
Attach the Rear Upright Cover (3) to the Upright
(2) with three M4 x 16mm Screws (36).
14
8
22
15
3
36
13
9
19
22
19
36
2