Volume Control; Vol +/-, (Mute Switching); For Operation; All Off - Silvercrest SFB 10.1 A1 Operating Manual

10-in-1 remote control
Hide thumbs Also See for SFB 10.1 A1:
Table of Contents

Advertisement

Available languages

Available languages

Volume control

Vol +/—,
Press the "VOL+" button to increase the volume. With the
"VOL —" button you reduce the volume. To mute the sound
press the
the sound back on.
When you activate the VOL +/— buttons j on the URC basi-
cally the volume adjustment on the TV device is addressed,
regardless thereof, which device button e was pressed
previously. However, this does not apply to the following
devices: "AMP", "DVD", "ASAT", and "DSAT" since it can
be assumed that these devices are equipped with their own
volume control.

For operation

> To operate one of the programmed devices with the URC
first press the corresponding device button e.
Then point the URC to this device and press the desired
button.
> Put the number buttons o exactly as you do with the
original remote control. Before you make a two digit
entry press, if necessary, the
> Press the FAV/EPG button 1( to start the electronic pro-
gramme guide of a device equipped with this function.
> If you press the S button r the date is superimposed for
10 seconds in the LCD display q below and on the right.
> Whilst you hold down one of the device buttons e the
active code for this device will be superimposed below to
the right in the LCD display q.
> Via the MENU button k you access the dialogue for the
setting of the respective target device.
> Press the illumination button d to switch the display and
button illuminations on and/or off.

All OFF

Tips:
With the button
are switched on can be automatically switched off. This func-
tion can switch on again devices that have already been
switched off (depending on the device). For this hold down
the ALL OFF button w for approx. 5 seconds. This will only
function under the following circumstances:
1. A visible connection exists between all the devices and
the URC.
2. Automatic code search, brand code search and MACRO
function are not active.
3. All target devices must be suitable for remote control
switch off.
(Mute switching)
-button h. A further press of this button turns
ALL OFF (all off) w all devices that
button a.
- 23 -

Advertisement

Table of Contents
loading

Table of Contents