Accessory List - Brother FAX-T96 User Manual

Accessory List

Model Name
PC-70
PC-71RF
PC-72RF
PC-74RF
*For optimum print quality and product performance within published
specifications, use only the correct Brother replacement ribbon.
Change Answer Mode
Press 9 8.
then for TAD, press 1.
(For FAX-T94)
Exit Remote Operation
Press 9 0.
Change Remote Access Code
1
2
3
4
(For FAX-T96)
Retrieve a Fax
Press 9 6.
then to Print a Memory Status List press
1, then enter the number of remote
fax machine, and then # #. After
the beep, hang up and wait.
Retrieve all faxes press 2, then
enter the number of remote fax
machine, and then # #. After the
beep, hang up and wait.
Erase all fax messages press 3.
Check Receiving Status
Press 9 7.
then for Fax message, press 1.
Voice message, press 2.
1 long beeps – received messages
3 short beeps – no messages
Description
Printing Cartridge (1 set per box)
1 re-fill for use in PC-70 Printing Cartridge
2 re-fills for use in PC-70 Printing Cartridge
4 re-fills for use in PC-70 Printing Cartridge
FAX/TEL, press 2.
FAX ONLY, press 3.
Press Menu/Set, 8, 3.
Enter a three- digit number. The cannnot be changed.
Press Menu/Set.
Press Stop/Exit.
Change Answer Mode
Press 9 8.
then for TAD:MSG MGR, press 1.
Exit Remote Operation
Press 9 0.
5
R
Using Remote Access Code
1
2
3
4
5
6
4
FAX/TEL, press 2.
FAX ONLY, press 3.
C A
EMOTE ONTROL
Dial your machine phone number from a touch tone
phone.
Enter your Remote Control Access Code (3 digits
followed by ) after the beep.
Your machine signals the kinds of messages received:
1 long beeps – Fax message(s)
No beeps – no messages
After 2 short beeps, enter a command.
Press 9 0 to reset your machine when you finish.
Hang up.
M M
ESSAGE ANAGER
R C
EMOTE ONTROL
Using Remote Access Code
1
Dial your fax machine phone number from a
touch tone phone.
2
Enter your Remote Control Access Code
(3 digits followed by ) after the beep.
3
The fax machine signals the kinds of
messages received:
1 long beep – Fax message(s)
2 long beeps – Voice message(s)
3 long beeps – Fax and Voice message(s)
No beeps – no messages
4
After 2 short beeps, enter a command.
5
Press 9 0 to reset the machine when you
finish.
6
Hang up.
6
ACCESSORY LIST A - 1
C
CCESS ARD
1
A C
CCESS ARD
1