Retrieving The Memory Status List; Retrieving Fax Messages - Brother FAX-T96 User Manual

Retrieving the Memory Status List

You can retrieve the Memory Status List from a remote fax machine
to see if you have any fax messages.
1
Dial your fax machine's number.
2
When you hear the beep, immediately enter your Remote
Access Code (3 digits followed by
3
When you hear two short beeps, use the dial pad to press
4
Using the dial pad, enter the number (up to 20 digits) of the
remote fax machine where you want the Memory Status List
forwarded, and then press
You cannot use
to store a pause, press
5
After you hear your fax machine beep, hang up and wait.
Your fax machine calls the remote fax machine and sends the
Memory Status List. The remote fax machine prints the List.

Retrieving Fax Messages

1
Dial your fax machine's number.
2
When you hear the beep, immediately enter your Remote
Access Code (3 digits followed by
3
As soon as you hear two short beeps, use the dial pad to press
9 6 2.
4
Using the dial pad, enter the number (up to 20 digits) of the
remote fax machine where you want your fax messages
forwarded, and then press
You cannot use
to store a pause, press
5
After you hear your fax machine beep, hang up and wait.
Your fax machine calls the remote fax machine and sends the
stored documents. The remote fax machine prints your fax
messages.
# #
.
#
and as dial numbers. However, if you want
#
.
# #
.
#
and as dial numbers. However, if you want
#
.
).
).
MESSAGE MANAGER 9 - 18
9 6 1
.