Switching OFF TX Lock System
1
When TX Lock System is switched
ON, press
The screen prompts you to enter the
password, followed by
2
Enter a 4-digit password and press
The screen displays ACCEPTED , then after 2 seconds the
display reverts to normal. TX Lock System is now switched
OFF.
■
If the password you enter at Step 2 is incorrect, the screen
would display WRONG PASSWORD . After 2 seconds the
display will then return to displaying TX LOCK MODE . You
must then start from Step 1 to switch OFF TX Lock System.
■
If you forget the TX Lock System password, please contact
your Brother dealer for service.
Menu/Set
.
Menu/Set
PASSWORD:----
ENTER & SET
.
Menu/Set
.
SETUP SEND 6 - 23