Accessory List - Brother 1030e User Manual

Accessory List

Model Name
PC-201
PC-202RF
PC-204RF
*For optimum print quality and product performance within published specifications, use
only the correct Brother replacement ribbon. The use of other ribbons may invalidate your
warranty.
Change Answer Mode
Press 9 8.
then for TAD, press 1.
(For FAX-1020e)
Exit Remote Operation
Press 9 0.
Change Remote Access Code
1
Press Menu/Set, 8, 3.
2
Enter a three- digit code using number keys 0-9, and #.
The cannnot be changed.
3
Press Menu/Set.
4
Press Stop/Exit.
(For FAX-1030e)
Retrieve a Fax
Press 9 6.
then to Print a Memory Status List press
1, then enter the number of remote
fax machine, and then # #. After
the beep, hang up and wait.
Retrieve all faxes press 2, then
enter the number of remote fax
machine, and then # #. After the
beep, hang up and wait.
Erase all fax messages press 3.
Check Receiving Status
Press 9 7.
then for Fax message, press 1.
Voice message, press 2.
1 long beeps – received messages
3 short beeps – no messages
Description
Printing Cartridge (1 set per box)
2 re-fills for use in PC-201 Printing Cartridge
4 re-fills for use in PC-201 Printing Cartridge
Fax/Telephone (F/T), press 2.
Fax, press 3.
Change Answer Mode
Press 9 8.
then for Message Centre, press 1.
Fax/Telephone (F/T), press 2.
Fax Only, press 3.
Exit Remote Operation
Press 9 0.
5
R C
EMOTE ONTROL
Using Remote Access Code
1
Dial your machine phone number from a touch tone
phone.
2
Enter your Remote Control Access Code (159 ) after
the beep.
3
Your machine signals the kinds of messages received:
1 long beeps – Fax message(s)
No beeps – no messages
4
After 2 short beeps, enter a command.
5
Press 9 0 to reset your machine when you finish.
6
Hang up.
4
M
ESSAGE
R C
EMOTE
Using Remote Access Code
1
Dial your fax machine phone number from a
touch tone phone.
2
Enter your Remote Control Access Code
(159 ) after the beep.
3
The fax machine signals the kinds of
messages received:
1 long beep – Fax message(s)
2 long beeps – Voice message(s)
3 long beeps – Fax and Voice message(s)
No beeps – no messages
4
After 2 short beeps, enter a command.
5
Press 9 0 to reset the machine when you
finish.
6
Hang up.
6
A C
CCESS ARD
1
M
ANAGER
A C
ONTROL CCESS ARD
1
99