Replacing The Tail/Brake Light Bulb; Supporting The Motorcycle - Yamaha Drag Star XVS125 Owner's Manual

1. Lens
2 Screw (×2)
Replacing the tail/brake light
bulb
1. Remove the tail/brake light lens
by removing the screws.
PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
1. Bulb
2. Remove the defective bulb by
EAU01623
pushing it in and turning it coun-
terclockwise.
Tail/brake light bulb, replacing
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
cC
Do not overtighten the screws,
otherwise the lens may break.

Supporting the motorcycle

Since this model is not equipped with
a centerstand, follow these precau-
1
tions when removing the front and
rear wheel or performing other main-
tenance requiring the motorcycle to
stand upright. Check that the motor-
cycle is in a stable and level position
before starting any maintenance. A
strong wooden box can be placed
under the engine for added stability.
To service the front wheel
EC000108
6-37
1. Stabilize the rear of the motorcy-
cle by using a motorcycle stand
or, if an additional motorcycle
stand is not available, by placing
a jack under the frame in front of
the rear wheel.
2. Raise the front wheel off the
ground by using a motorcycle
stand.
EAU01579
Supporting the motorcycle
6