Replacing A Turn Signal Light Bulb - Yamaha Drag Star XVS125 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
6. Install the headlight unit by
installing the screws.
7. Have a Yamaha dealer adjust
the headlight beam if necessary.
6
1
1. Lens
2. Screw (×2)
Replacing a turn signal light
bulb
1. Remove the turn signal lens by
removing the screws.
6-36
2
1. Bulb
2. Remove the defective bulb by
EAU03218
pushing it in and turning it coun-
terclockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
cC
Do not overtighten the screws,
otherwise the lens may break.
1
EC000108