Belkin F5D7230-4 User Manual page 48

Wireless cable/dsl gateway router
Hide thumbs Also See for F5D7230-4:
Table of Contents

Advertisement

TROUBLESHOOTING
My connection type is
1. Since your connection type is "static IP
"static IP address". I cannot
connect to the Internet.
2. Your ISP may bind your connection to the
1. Make sure your computers are correctly
My connection type is
"dynamic IP address". I
cannot connect to the
Internet.
2. Make sure the cable or DSL line is properly
3. Make sure the network cable between the
4. Your ISP may bind your connection to the
address", your ISP must assign you the IP
address, subnet mask, and gateway address.
Make sure that the Router's connection type
is configured as "Static IP Address" and
verify your settings.
MAC address of your computer's NIC. Clone
your MAC address.
configured and all network cables are
properly connected.
attached on your cable or DSL modem. Refer
to the manual of your modem to verify that
it works normally.
modem and the barricade is well connected.
Power off the modem; wait a few seconds
and then power it on again.
MAC address of your computer's NIC. Clone
your MAC address.
92
TROUBLESHOOTING
My connection type is
1. Since your connection type is PPPoE, your
"PPPoE". I cannot connect
to the Internet.
2. Make sure your computers are correctly
3. Make sure the coaxial cable or DSL line is
4. Make sure the network cable between the
5. Your ISP may bind your connection to the
ISP will assign you a user name and
password and sometimes a service name.
Make sure the Router connection type is
configured as "PPPoE" and these settings are
entered properly.
configured and all network cables are
properly connected.
properly attached on your cable or DSL
modem. Refer to the manual of your modem
to verify it works normally.
modem and the Router is well connected.
Power off the modem for a few seconds and
power on it again.
MAC address of your computer's NIC. Clone
your MAC address.
93

Advertisement

Table of Contents
loading

Table of Contents