Belkin F5D7230-4 Start Here

Make sure you have
1.
Install
the following:
Run the Easy Install Wizard Software
Installation Wireless G Power Ethernet User
Software CD Router Supply Cable Manual
��������������������
Manual Setup Auto Setup
����������������� ����
�������
���������
Advanced Users Users of
����������
Go to "Alternate Windows ® 98SE
�������
Windows Me
Setup Method" in
�����������
�������
your User Manual. Windows 2000
����������
����������
Windows XP ���� ����
��������
Mac OS ® X
can use Easy Install Wizard
IMPORTANT: Run the Easy Install
Wizard from the computer that is
directly connected to the cable or
DSL modem. DO NOT CONNECT
the Router at this time.
NOTE for Windows Users:
If the Easy Install Wizard does not start up
automatically, select your CD-ROM drive from
"My Computer" and double-click on the file
Make sure you have the following 1
named "EasyInstall.exe" on the CD-ROM.
1.4
You will see the Wizard's welcome screen.
(click) Run the Easy Install Wizard
�
�
�
�
�
�
1.5
Select your region from the drop-down box
shown on the screen.
(click)
1.1
Shut down any programs that are running
on your computer. DO NOT CONNECT
THE ROUTER AT THIS TIME.
1.6
You will now see the first of a series of
1.2 Turn off any firewall or Internet-connection-
progress screens to help you know where
sharing software on your computer.
you are in the setup process.
1.3 Windows users:
Insert the Easy Install
(click)
Wizard software CD into your
CD-ROM drive. The Easy Install Wizard
screen will automatically appear
on your screen within 15 seconds.
Mac OS Users:
Insert the CD into your
CD-ROM drive. A drive will appear on
1.7 The next screen will tell you that the
your desktop called "Belkin Easy Install".
Wizard is examining your network settings.
Double-click the drive to open it.
When the Wizard is finished examining
Mac OS 9 users—double-click the program
your settings, click "Next".
called "Easy Install OS 9". Mac OS X
users—double-click the program called
(click)
"Easy Install OSX.dmg".
Install 2
��������������������
2. Connect
�������
���� ����
Connect your Router to your Computer and Modem
OK
2.1
This step instructs you to locate the
cable connected between your modem
and the networking port on your
computer. Unplug this cable from the
computer and plug it into the
modem port on the Router.
Next
(click)
Next
2.2
This step instructs you to locate the This step instructs you to locate the This step instructs you to locate the
wired computer cable that is included
with your Router. Plug one end of
this cable into ANY one of the
wired computer ports on your Router.
Plug the other end of the cable into the
networking port on your computer.
Next
(click)
Next
Install 3
2.3 This step instructs you to locate the power
supply that is included with your Router.
Plug the power supply's small connector
into the GRAY port on the Router. Plug the
power supply into an empty power outlet.
Next
(click)
2.4
This step instructs you to look at the lights
on the front of your Router. Make sure the
appropriate lights are ON. Refer to the
Easy Install software on your computer's
screen for more details.
(click) Next
GREEN
BLUE
Connect 4 Connect
3.
Check
Check the Router's Connection
3.1 Once you have connected the Router,
the Wizard will check the connection
and then determine what type of Internet
connection you have.
Next
(click)
3.2 User Name and Password Needed
If you have a connection type that
requires a user name and password, the
Wizard will ask you to type them in. If
your connection type does not require
a user name and password, you will not
see this screen.
Next
(click)
5 Check 6