Belkin F5D7230-4 User Manual page 17

ALTERNATE SETUP METHOD
Alternative Method Step 4:
Configuring your Router for Connection to your ISP
The "Internet/WAN" tab is where you will set up your Router to connect to your
Internet Service Provider. The Router is capable of connecting to virtually any
Internet Service Provider's system provided you have correctly configured the
Router's settings for your ISP's connection type. Your ISP connection settings are
provided to you by your ISP. To configure the Router with the settings that your
ISP gave you, click "Connection Type" (A) on the left side of the screen. Select
the connection type you use. If your ISP gave you DNS settings, clicking "DNS"
(B) allows you to enter DNS address entries for ISPs that require specific
settings. Clicking "MAC address" (C) will let you clone your computer's MAC
address or type in a specific WAN MAC address, if required by your ISP. When you
have finished making settings, the "Internet Status" indicator will read
"connection OK" if your Router is set up properly.
(A)
(B)
(C)
30
ALTERNATE SETUP METHOD
Setting your Connection Type
From the connection type page, you can select the type of connection you use.
Select the type of connection you use by clicking the radio button (1) next to
your connection type and then clicking "Next" (2).
(1)
(2)