Belkin F5D7230-4 User Manual page 24

USING THE WEB-BASED ADVANCED USER INTERFACE
Using the Wireless Mode Switch
Your Router can operate in two different wireless modes, "54g-Auto" and "54g-
Only". In 54g-Auto mode, the Router will be compatible with 802.11b and 54g
wireless clients simultaneously. This mode is the factory default and ensures full
compatibility with all Wi-Fi-compatible devices. Set the Router to 54g-Auto
mode if you have a mix of 802.11b and 54g clients in your network. 54g-Only
mode will be compatible with 54g clients only. This mode can be useful only if
you do not have any 802.11b clients that need access to the network. To switch
modes, select the desired mode from the drop-down box next to "Wireless Mode"
then click "Apply Changes".
44
USING THE WEB-BASED ADVANCED USER INTERFACE
Changing the Wireless Channel
There are a number of operating channels you can choose from. In the United
States, there are 11 channels. In the United Kingdom and most of Europe, there
are 13 channels. In a small number of other countries, there are other channel
requirements. Your Router is configured to operate on the proper channels for
the country you reside in. The default channel is 11. The channel can be
changed if needed. If there are other wireless networks operating in your area,
your network should be set to operate on a channel that is different than the
other wireless networks. For best performance, use a channel that is at least five
channels away from the other wireless network. For instance, if another network
is operating on channel 11, then set your network to channel 6 or below. To
change the channel, select the channel from the drop-down list. Click "Apply
Changes". The change is immediate.
45