Zoom H4next Operation Manual page 142

This is a compressor which attenuates high-level signals
RackComp
and boosts lowlevel signals.
(1) THRSHOLD Adjusts the threshold level of the compressor.
(2) RATIO
Adjusts the compression ratio of the compressor.
(3) ATTACK
Adjusts the attack speed of the compressor.
Adjusts the level of the signal after passing the
(4) LEVEL
This is a limiter which attenuates high-level signals that
LIMITER
exceed a certain threshold.
(1) THRESHOLD Adjusts the threshold level of the limiter.
(2) RATIO
Adjusts the compression ratio of the limiter.
Adjusts the speed of the limiter release after the
(3) RELEASE
signal falls below the threshold level.
Adjusts the level of the signal after passing the
(4) LEVEL
Modulation effect types
This is an auto wah effect that tracks the input signal
AUTO WAH
intensity.
Before,
(1) POSITION
After
(2) SENSE Adjusts the effect sensitivity.
Adjusts the resonance characteristic of the ef-
(3) RESONANC
fect.
Adjusts the level of the signal after passing the
(4) LEVEL
This effect produces sound with a pulsating character.
PHASER
Before,
(1) POSITION
After
(2) RATE Adjusts the modulation rate.
Ref. P144
(3) COLOR Selects the sound type of the effect.
Adjusts the level of the signal after passing the
(4) LEVEL
TREMOLO This effect periodically varies the volume.
(1) DEPTH Adjusts the modulation depth.
(2) RATE Adjusts the modulation rate.
Ref. P144
Allows selection of the modulation waveform.
9,
(3) WAVE 9,
Higher setting values result in more clipping of
TRI 0
wave peaks, which reinforces the effect.
Adjusts the level of the signal after passing the
(4) LEVEL