Table of Contents
Advertisement
If there are problems during operation of the H4n, check the following points first.
When playback is carried out with a track in recording standby condition,
a temporary file is created in the H4n. If the remaining capacity of the SD card is
low, the temporary file may use up all the remaining space, causing playback to
stop. In such a case, cancel the recording standby condition of the track.
No sound from connected instrument,or sound is very weak
P.047).
instrument.
P.071) is off, the input signal can only be
monitored if a track is set to recording standby or if the recorder is in the
recording standby condition.
protection off ( P.125).
protected. Slide the write-protect switch to the non-protected position.
Cannot use effects
mode and in 4-track mode.
P.047).
Cannot use tuner
P.047).
input source.
Unit is not recognized when connected to a computer via USB
requirements listed on page 035.
selected at the H4n ( P.033).
P.020).
Advertisement
Table of Contents
