Zoom H4next Operation Manual page 141

SVT
Simulation of Fender Bassman 100 sound.
BASSMAN
HARTKE
SUP-Bass
SANSAMP
TUBE PRE
The above 6 effect types have the same parameters.
(1) CABINET
Adjusts the intensity of the speaker cabinet sound.
(2) GAIN
(3) BASS -12 _ 12 Adjusts boost/cut in the low range.
(4) MIDDLE Adjusts boost/cut in the middle range.
(5) TREBLE Adjusts boost/cut in the high range.
Sets the mixing balance between the signal before
(6) BALANCE input and after passing the module. Higher values
result in a higher ratio of post-module signal.
Adjusts the level of the signal after passing the
(7) LEVEL
(8) ZNR OFF,
Adjusts the sensitivity of the noise reduction circuit
(ZOOM Noise Reduction)
registered trademarks of their respective owners. The names are used only to illustrate
VO MPRE Preamp with characteristics optimized for vocals.
Preamp with characteristics optimized for recording an acoustic
AG MPRE
guitar.
FlatMPRE Preamp with flat characteristics.
The above 3 effect types have the same parameters.
Adjusts the parameter which keeps the level within
OFF,
(1) COMP a certain range by attenuating high-level signals
and boosting low-level signals.
OFF,
Adjusts the degree by which sibilants are attenu-
(2) DE-ESSER
ated.
Adjusts the frequency of a filter designed to at-
OFF,
(3) LOW CUT tenuate low-frequency noise that is easily picked
up my a mic.
(4) BASS
Adjusts boost/cut in the low range.
(5) MIDDLE
Adjusts boost/cut in the middle range.
(6) TREBLE
Adjusts boost/cut in the high range.
Adjusts the level of the signal after passing the
(7) LEVEL
(8) ZNR OFF,
Adjusts the sensitivity of the noise reduction circuit
(ZOOM Noise Reduction)