Table of Contents
Advertisement
•
the clutch pedal is held depressed for a
short time - however, a few seconds does
5
not activate standby mode
•
the gear selector is moved to neutral
position (automatic gearbox)
•
the driver maintains a speed higher than
the set speed for longer than 1 minute.
The driver must then regulate the speed.
Related information
•
Cruise control* (p. 185)
•
Cruise control* - managing speed (p. 186)
•
Cruise control* - resume set speed (p.
187)
•
Cruise control* - deactivate (p. 187)
Cars with 4-cyl 2.0L engine also allow gear changing.
5
Cruise control* - resume set speed
The cruise control (CC – Cruise Control) helps
the driver to maintain an even speed. After
temporary deactivation and standby mode (p.
186) it is possible to resume the set speed.
To reactivate the cruise control from standby
mode:
•
Press the steering wheel button
>
The combined instrument panel's mark-
ing (5) and symbol (6) change colour from
GREY to WHITE and the speed is then
set to the last speed stored.
NOTE
A marked speed increase may occur once
the speed has been resumed by selecting
.
Related information
•
Cruise control* (p. 185)
•
Cruise control* - managing speed (p. 186)
•
Cruise control* temporary deactivation
and standby mode (p. 186)
•
Cruise control* - deactivate (p. 187)
07 Driver support
Cruise control* - deactivate
The cruise control (CC – Cruise Control) helps
the driver to maintain an even speed. How it
is deactivated is described here.
The cruise control is deactivated with a steer-
ing wheel button (1) or by switching off the
engine - the set speed is deleted from the
memory and cannot be resumed with the
.
button.
Related information
•
Cruise control* (p. 185)
•
Cruise control* - managing speed (p. 186)
•
Cruise control* temporary deactivation
and standby mode (p. 186)
•
Cruise control* - resume set speed (p.
187)
*
Option/accessory, for more information, see Introduction.
07
187
Advertisement
Table of Contents
