Table of Contents
Advertisement
1. To ensure that no control is in the middle
of a sequence - "Reset" them first with
2 presses on RESET.
Heading combinations
Average
Trip meter T1 + Meter reading
Instantaneous
Trip meter T2 + Meter reading
Instantaneous
Meter reading
No trip computer information.
The combined instrument panel's heading
combination for the trip computer can be
changed to another option at any time during
the journey. Proceed as follows:
–
Turn the thumbwheel - stop on the
desired heading.
Related information
•
Trip computer - supplementary informa-
tion (p. 112)
•
Trip computer - trip statistics* (p. 113)
2. Turn the thumbwheel - selectable head-
ing combinations are shown in a loop.
Information
•
Average speed
Long press on RESET resets trip meter T1.
•
Long press on RESET resets trip meter T2.
Distance to empty
tank
kmh<>mph
kmh<>mph - see section "Digital speed display" (p. 112).
This option extinguishes all three trip computer displays - it also marks
the beginning/end of the loop.
03 Instruments and controls
3. Stop on desired heading combination.
*
Option/accessory, for more information, see Introduction.
03
111
Advertisement
Table of Contents
