Table of Contents
Advertisement
Emergency puncture repair -
operation
Emergency puncture repair, where the emer-
gency puncture repair kit (TMK - Temporary
Mobility Kit) is used to seal a puncture and
check and adjust the tyre pressure (p. 407).
Emergency puncture repair
For information on the function of the parts, see
Emergency puncture repair kit - overview (p.
334).
1. Detach the label for maximum permitted
speed (which is fitted on one side of the
compressor) and affix it to the steering
wheel.
WARNING
You should not drive faster than 80 km/h
after the emergency tyre repair kit has
been used. Volvo recommends that you
visit an authorised Volvo workshop for
inspection of the sealed tyre (maximum
driving distance is 200 km). The staff there
can determine whether or not the tyre can
be repaired or if it needs to be replaced.
WARNING
The sealing fluid can irritate the skin. In the
case of contact with skin, wash away the
fluid with soap and water.
2. Check that the switch is in position 0 and
locate the cable and the air hose.
NOTE
Do not break the bottle's seal before use.
The seal is broken automatically when the
bottle is screwed in.
3. Unscrew the orange cap and unscrew the
bottle's stopper.
09 Wheels and tyres
4. Screw the bottle into its holder.
WARNING
Do not unscrew the bottle, it is equipped
with a reverse catch to prevent leakage.
5. Connect the hose from the compressor to
the valve.
6. Plug the cable into the 12 V socket and
start the car.
NOTE
If the compressor is connected to one of
the two 12 V sockets, in the tunnel con-
sole, no other current consumer must be
connected to the other one.
WARNING
Do not leave children in the car without
supervision when the engine is running.
09
}}
335
Advertisement
Table of Contents
