Table of Contents
Advertisement
07 Driver support
||
Automatic standby mode
Cruise control is temporarily disengaged and
set in standby mode if:
•
wheels lose traction
•
engine speed is too low/high
•
speed falls below approx. 30 km/h.
The driver must then regulate the speed.
Related information
•
Cruise control* (p. 198)
•
Cruise control* - managing speed (p. 199)
•
Cruise control* - resume set speed
(p. 200)
•
Cruise control* - deactivate (p. 200)
07
*
200
Option/accessory, for more information, see Introduction.
Cruise control* - resume set speed
The cruise control (CC – Cruise Control) helps
the driver to maintain an even speed.
After temporary deactivation and standby
mode (p. 199) it is possible to resume the set
speed.
To reactivate the cruise control from standby
mode:
•
Press the steering wheel button
>
The combined instrument panel's
marking (5) and symbol (6) change colour
from GREY to WHITE - the car then fol-
lows the last stored speed.
NOTE
A marked speed increase may occur once
the speed has been resumed by selecting
.
Related information
•
Cruise control* (p. 198)
•
Cruise control* - managing speed (p. 199)
•
Cruise control* temporary deactivation
and standby mode (p. 199)
•
Cruise control* - deactivate (p. 200)
Cruise control* - deactivate
How it is deactivated is described here.
Cruise control is switched off with the steer-
ing wheel button (1) or by switching off the
engine - the set/stored speed is thus cleared
and cannot then be resumed with the
ton.
Related information
.
•
Cruise control* (p. 198)
•
Cruise control* - managing speed (p. 199)
•
Cruise control* temporary deactivation
and standby mode (p. 199)
•
Cruise control* - resume set speed
(p. 200)
but-
Advertisement
Table of Contents
