Operating Sequence; Washing 5 Kg Of White Cotton At 95°C; Load The Laundry; Measure Out The Detergent And The Fabric Softener - Electrolux Zanussi ZWF 1021 W Quick Installation Manual

Operating Sequence

Before the first wash, we recommend that you pour 2
litres of water into the main wash compartment
the detergent drawer in order to activate the ECO valve.
Then run a cotton cycle at 95°C, without any laundry in
the machine, to remove any manufacturing residue from
the drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.
WASHING 5 KG OF WHITE COTTON AT 95°C
Suppose you have 5 kg of heavy soiled laundry to wash.
It is white cotton and is suitable for high temperature
washing.

1. Load the laundry

Open the door by carefully pulling the door handle
outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.
P0004
2. Measure out the detergent
and the fabric softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required, pour it
into the main wash compartment
carry out the prewash phase, pour it into the
compartment marked
If required, pour fabric softener into the compartment
marked (the amount used must not exceed the
"MAX" mark in the drawer). Close the drawer gently.
C0064
and, if you wish to
.
C0065

3. Select the required programme

of
Turn the programme selector dial to the 95 programme.
The light Start/Pause starts to flash.
Programme
4. Select the spin speed or
option RINSE HOLD or NO
SPIN
Turn the selector dial to the required position.
ZWF 1021 W
Spin
ZWF 1421 W - S
Spin
5. Select the required option(s)
Select Daily
required, the corresponding light illuminates.
Pre-
Options
wash
9
ZWF 1221 W - S
ZWF 1621 W -S
, Quick or Prewash option, if
Half
Load
Spin
Spin