Making And Answering Calls; Using The Speakerphone; To Make A Call; To Answer A Call - Binatone iDECT V2i System Manual

iDect_V2i_IFU_master.book Page 15 Thursday, March 27, 2008 2:54 PM

Making and answering calls

Using the
The speakerphone lets you hear calls without holding
speakerphone
the handset to your ear.
You can switch between speakerphone and earpiece
o mode during calls at any time by pressing the PHONE
button. The display will show the speakerphone icon.
1 .
To make a
call
B
2
o
To answer a
When there's an incoming call, the base unit and
call
handset ring (unless the ringers are turned off). If you
subscribe to Caller Display (see page 22) the caller's
number or name may appear on the display; otherwise,
the display shows
Press PHONE button to answer the incoming call.

To end a call

f
!
!
Help Line: 0845 345 9677
Key in the telephone number
If you make a mistake, press the BACK button
to clear digits one by one from the display.
Press the PHONE button. The display shows
Calling and the number being dialled.
(You can dial the number after you press the
PHONE button to get Dial tone first if you
prefer, but you can't correct any mistakes if you
do it this way.)
External CALL.
Press the HANG UP button so that the IN USE
light on the base unit goes out
Or just replace the handset on the base unit
! The display shows Call Ended
of the call for 5 seconds.
(Local Call rate)
and the duration
15