Dcp (Detachable Control Panel) - Clarion DB179MP Owner's Manual

.?'
/
OCP case .._.../
DCP Rear Panel
Storing the DCP in the DCP case
Hold the OCP, in the orientation as shown in the
figure below, and put it into the supplied OCP
case. (Ensure the OCP is in the correct orienta-
tion .)
Main Unit Front
• The DCP can easily be damaged by impact.
After removing it, be careful not to drop it
or subject it to strong shocks.
• When the Release button is pressed and
the DCP is unlocked, the car's vibrations
may cause it to fall. To prevent damage to
the DCP, always store it in its case after
detaching it. (See figure above.)
• The connector connecting the main unit and
the DCP is an extremely important part. Be
careful not to damage it by pressing on it
with fingernails, pens, screwdrivers, etc.
Note:
• If the OCP is dirty, wipe off the dirt with a soft. dry
cloth only.
• To remove the front panel OCP. is important that
left side should be lift slightly to avoid stucking.
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in the DCP (Detachable Control Panel) case to
prevent scratches.
We recommend taking the OCP with you when
leaving the car.
*
The OCP is unlocked
Removing the DCP
1. Press the [SRC] button for 1 second or longer
to switch off the power.
2. Press in the [RELEASE] button.
/,... [RELEASE] button
!
~'-~L~l
i~
3. Remove the OCP.
Attaching the DCP
1. Insert the right side of the DCP into the main
unit.
2. Insert the left side of the OCP to attach into the
main unit.
8