Basic Operations - Clarion DB179MP Owner's Manual

Basic Operations
Note: Be sure to read this chapter referring to the front diagrams of
chapter "2. CONTROLS" on page 3.
Be sure to lower the volume before switch-
ing off the unit power or the ignition key. The
unit remembers its last volume setting. If
you switch the power off with the volume up,
when you switch the power back on, the sud-
den loud volume may hurt your hearing and
damage the unit.
Turning onloff the power
Note:
• Be careful about using this unit for a long time
without running the engine. If you drain the car's
battery too much, you may not be able to start the
engine and this can reduce the service life of the
battery.
1. Press the [SRC] button.
2. The illumination and display on the unit light
up. The unit automatically remembers its last
Operation mode and will automatically switch
to display that mode.
3. Press and hold the [SRC] button for 1 second
or longer to turn off the power for the unit.
Selecting a mode
1. Press the [SRC] button to change the Opera-
tion mode.
2. Each time you press the [SRC] button, the Op-
eration mode changes in the following order:
Radio mode
~
CD/MP3IWMA mode
~
AUX mode
~
Radio mode...
Note:
• If the CD mode is selected when no disc is inserted,
the display shows "NO DISC".
Switching the display
Press the [D] button to select the desired display.
Each time you press the [D] button, the display
switches in the following order:
USB Mode
Main display
~
clock display
~
Main display
Note: This function only apply for model DB279USB
• Radio mode
Main Display ~ Clock Display ~ Main Display...
• CD mode
Main Display (Track No., Play Time)
~
Clock Display
~
Main Display...
• MP3IWMA mode
Main-1 Display (Track No., Play Time)
~
Main-2 Display (Folder No., Play Time)
~
Track
~
Folder
~Title ~
Album
~
Artist
~
~
Clock Display
~
Main-1 Display...
• AUX mode
Main Display
~
Clock Display
~
Main Display...
*
Once selected, the preferred display becomes the
display default. When a function adjustment such
as volume is made, the screen will momentarily
switch to that function's display, then revert back
to the preferred display several seconds after the
adjustment.
Adjusting the volume
Turning the [ROTARY] knob clockwise increases
the volume; turning it counterclockwise decreas-
es the volume. "VOL XX" will be displayed where
"XX" is the volume level from 0 (minimum) to 33
(maximum).
*
The factory default setting for volume is 'VOL
13".
Sound mode adjustments
1. Press the
[J'] button to enter the Sound Adjust-
ment mode.
2. Press the [
~
,
~~]
button to select the
"item name".
"Z-EHCR"
t
"BASS"
t
"TREBLE"
t
"BALANCE"
t
"FADER"
11