Radio Mode Operations - Clarion DB179MP Owner's Manual

Radio Mode Operations
Listening to the radio
1. Press the [SRC] button and select the Radio
mode. then the radio will be on.
2. To select a preset band. press the [BND] but-
ton, and then select one of the preset bands
such as FM1, FM2, FM3 or AM.
Every time the [BND] button is pressed. the
band switches in the following order:
F1
~
F2
~
F3
~
AM
~
F1 ...
3. Press the [ ,.......... ,
~~,]
button to tune in the
desired station.
Seek tuning
1. Press the [BND] button and select the desired
band (FM or AM)
*
If MANU" is lit in the display. oress and hold
the [BND] button for 1 second or longer.
"MANU" in the display goes off and seek tuning
is now available.
2. Press the [,.......... ,
~~I]
button to start automatic
station tuning.
When the
[~~,]
button is pressed. search will
be performing in the direction of higher fre-
quencies. When the [,.......... ] button is pressed,
search will be performed in the direction of
lower frequencies
Manual tuning
There are
2
ways available Quick tuning and
step tuning.
When you are in the step Tuning mode. the fre-
quency changes one step at a time. In the quick
Tuning mode. you can quickly tune the desired
frequency.
1. Press the [BND] button and select the desired
band (FM or AM).
"" If "MANU" is not lit in the display. press and hold
the [BND] button for 1 second or longer.
"MANU" is !It in the display and manual tuning
is now available.
2.
Tune into
a
station
• Quick tuning:
Press and hold the [ ,.......... .
""~I J
button for 1 sec-
ond or longer to begin static·rJ tuni!'Q.
14
• Step
tuning:
Press the
[I...........
~~I
] button to perform manual
tuning.
Preset memory function
Preset memory function can store up to
24
sta-
tions
Six stations for each of FM 1, Ffvl2, FM3 and AM.
Manual memory function
1. Press the [BND] button and to select
3.
band
you want to store in th9 memory.
2. Press the
[,~
......
~~]
button to tune Into a
desired station.
3. Press and hold one of the [DIRECT] buttons for
2
seconds or longer to store the current station
into preset memory.
Auto store
Auto store is a function for storing up to 6 stations
that are automatically tuned in sequentially. If
6
receivable stations cannot be received. a previ-
ously stored station remains un-overwritten at
the memory position.
1. Press the [BND] button and select the desired
band (FM or AM).
2. Press and hold the
[~
II] button for 2 seconds
or longer. The stations with good reception are
stored automatically to the preset channels
"A-STORE" will be displayed.
Preset scan
Preset scan receives the stations stored in preset
memory in order. This function is useful when
searching for a desired station in memory
1. Press the
[~II]
button.
2. When a desired station is tuned in, press the
[~II]
button again to continue receiving that
station. "P-SCN" will be displayed and "SeN"
indicator lights in the display.
Note:
• Be careful not to press and hold the r
~
IIJ button
for 2 seconds or longer. otherwise the auto store
function is engaged and the unit starts storing sta-
tions.