5.20 Feed Roller
1. Before you remove the Feed Roller, you should
remove:
- Middle Cover Unit (Refer to 5.9)
- LSU (Refer to 5.12)
- Drive Ass'y (Refer to 5.14)
2. Remove the two screws from the Guide Paper and
take it out.
Guide Paper
3. Pull up the Feed Idle Bush and Feed Idle Shaft, as
shown below.
Feed Idle
Shaft
Spring
Bush
Samsung Electronics
4. Remove the three screws from the Feed Bracket and
take it out.
Feed Bracket
5. Remove the Idle Gear and Feed Gear2.
Feed Gear2
Idle Gear
Disassembly and Reassembly
Service Manual
5-21