Transfer Roller - Samsung SCX-4200 Series Service Manual

Disassembly and Reassembly

5.19 Transfer Roller

1. Before you remove the Transfer Roller, you should
remove:
- Scanner Unit (Refer to 5.7)
- Middle Cover Unit (Refer to 5.9)
- LSU (Refer to 5.12)
2. Remove the three screws and take the Transfer Earth
out.
Transfer
Earth
3. Unplug the PTL PBA Harness then remove the PTL
Holder and PTL Lens, as shown below. Take care to
note the orientation of the PTL Lens and ensure it is
refitted correctly.
PTL
PTL
Lens
Holder
PTL PBA
Harness
Service Manual
5-20
4. Unlatch the Bush and remove it. Then lift the Transfer
Roller out, as shown below.
Transfer Roller
Bush
Samsung Electronics