Scanner Unit - Samsung SCX-4200 Series Service Manual

5.7 Scanner Unit

1. Before you remove the Scanner Unit, you should
remove:
- Front Cover (Refer to 5.2)
- Rear Cover (Refer to 5.3)
- Right Side Cover (Refer to 5.5)
- Left Side Cover (Refer to 5.6)
2. Unplug the two connectors(Scan Motor, OPE Unit)
and CIS FFC from the Main PBA, as shown below.
CIS FFC
OPE
Scan Motor
3. Carefully lift the Scanner Unit from the base taking
care to thread the cables through the frame.
Scanner Unit
Samsung Electronics
CIS FFC
Scan Motor
OPE
4. Lift the Platen Cover upward and remove it.
Platen Cover
Scanner Unit
5. To remove OPE Unit, first pull the part below the front
of the OPE Unit with a light pressure to the direction
of arrow.
OPE Unit
Disassembly and Reassembly
Service Manual
5-7