No Video Is Shown On The Tv - Denon AVR-X3000 Owner's Manual

Contents

2 No video is shown on the TV

Symptom
No picture appears.
No video is shown on the TV with the
DVI-D connection.
No video from an input source such
as a game console is shown on the
TV.
While the menu is being displayed, no
video is shown on the TV.
When using HDMI ZONE2, the video
output in MAIN ZONE is interrupted.
Front panel Display
Connections Playback
• Check the connections for all devices.
• Insert connection cables all the way in.
• Check that input connectors and output connectors are not reversely connected.
• Check cables for damage.
• Match the input settings to the input connector of the TV connected to this unit.
• Check that the proper input source is selected.
• Check the video input connector setting.
• Check that the resolution of the player corresponds to that of the TV.
• Check whether the TV is compatible with copyright protection (HDCP). If connected to a
device not compatible with HDCP, video will not be output correctly.
• The HDMI signal cannot be converted to an analog signal. Use analog connections.
• With the DVI-D connection, on some device combinations, devices may not function properly
due to the copy guard copyright protection (HDCP).
• When special video signals are input from a game console, etc., the video conversion function
may not function. Connect the input connector to the monitor output connector of the same
type.
• When the menu is operated during playback of some 3D video contents or of video at some
computer resolutions (such as VGA), no playback video is shown in the background of the
menu.
• When ZONE2 is operated with the same input source selected for MAIN ZONE and ZONE2,
video in MAIN ZONE may be interrupted.
Rear panel
Settings
Cause / Solution
187
Remote
Tips Appendix
Page
32, 33, 35,
36, 37, 38
46, 119
Index
–
–
–
146
146
173
197
198
197
–
–
–