Denon AVR-X3000 Owner's Manual page 123

Contents
Setting items
Graphic EQ
Speaker Selection
Adjust EQ
Curve Copy
2 Video
Setting items
Picture Adjust
Picture Mode
Contrast
Brightness
Saturation
Hue
Noise Reduction
Enhancer
HDMI Setup
Auto Lip Sync
HDMI Audio Out
HDMI Pass Through
HDMI Control
Pass Through Source
Power Off Control
Front panel Display
Connections Playback
Uses the graphic equalizer to adjust the tone of each speaker.
Select whether to adjust tones for individual speakers or for all speakers.
Adjust tonal balance for each frequency band. Adjust the speaker selected in "Speaker Selection".
Copy "Audyssey Flat"curve from MultEQ® XT.
Adjusts the video quality.
Select the desired picture mode according to the video content and your viewing environment.
Adjust picture contrast.
Adjust picture brightness.
Adjust picture chroma level (color saturation).
Adjust green and red balance. Also called Tint.
Reduce overall video noise.
Emphasize picture sharpness.
Makes settings for HDMI video/audio output.
Make automatic compensation for timing shift in audio and video output.
Select HDMI audio output device.
Selects how the AV receiver will pass HDMI signals to the HDMI output in standby power mode.
You can link operations with devices connected to HDMI and compatible with HDMI Control.
The AV receiver will "pass through" the sources HDMI signal when in standby.
Links the power standby of this unit to external devices.
Rear panel
Settings
Description
Description
123
Remote
Tips Appendix
Index
Page
139
139
139
139
Page
140
140
140
140
140
140
141
141
141
141
142
142
142
142
142