Contents
Manual Setup
Perform when setting the speakers manually or when changing settings
made in Audyssey® Setup.
• If you change the speaker settings after performing Audyssey® Setup, it
will not be possible to select Audyssey MultEQ® XT, Audyssey Dynamic
EQ® and Audyssey Dynamic Volume® (vpage 136, 137).
• "Manual Setup" can be used without changing the settings. Please set
if necessary.
Front panel
Display
Connections
Playback
Rear panel
Settings
Amp Assign
Select power amplifier usage method to match your speaker system.
2 Assign Mode
Select how to use the power amp.
Surround Back (Default) : Setting for 7.1-channel playback using
ZONE2 : Setting to assign the unit's built-in power amplifier for ZONE2
and output the audio in stereo.
Bi-AMP : Setting to use the front speakers via the bi-amp connection.
Front B : Setting to use the second set of front speakers for playback.
You can switch the front speakers A and B to be used for
playback in accordance with the 2-channel playback or multi-
channel playback mode. When you select this Front B setting,
also perform the "Front Speaker Setup" (vpage 164)
procedure.
Front Height : Setting for 7.1-channel playback using front height
speakers.
Front Wide : Setting for 7.1-channel playback using front wide
speakers.
159
Remote
Tips
Appendix
surround back speakers.
Index