Denon AVR-X3000 Owner's Manual page 118

Contents
2 Connection 2 : Connection through the speaker
output terminals
• Set the "Assign Mode" (vpage 159) setting to "ZONE2", and
outputs ZONE2 audio from SURROUND BACK speaker terminals
(The default setting is "Surround Back").
• If you set the "Assign Mode" (vpage 159) setting to "ZONE2",
the main zone home theater system can play back up to 5.1-channels.
Even if you play back audio recorded in 6.1 or 7.1-channels, this unit
automatically downmixes the audio to 5.1-channels.
MAIN ZONE
This unit
Front panel Display
Connections Playback
ZONE2
(L)
w q w
Rear panel
Settings
2 Connection 3 : Connection using an external
amplifier
The audio signals of this unit's ZONE2 audio output connectors are
output to the ZONE2 amplifiers and played on these amplifiers.
MAIN ZONE
This unit
%
• We recommend using high quality pin-plug (RCA type) cables for audio connections
in order to prevent noise.
(R)
• If you select a same input source for MAIN ZONE and ZONE2, audio playback may
be restricted.
q
118
Remote
Tips Appendix
ZONE2
Power
ZONE2 FRONT CENTER SURROUND SURROUND BACK
amplifier
L
SUBWOOFER
1 2
R
PRE OUT
Index
AUX IN